Funny T-Shirts

Consider that the slug from a decent handgun leaves the barrel @ approx 1000 fps and weighs ~ 20g. The motorcycle was traveling only a fifth that speed, but weighs *much* more.
Momentum comparison:
9mm slug is 1000fps*20g=20,000 (whatever unit)
motorcycle is 227fps*350000g= ~80,000,000 (same whatever units) [est. bike weight+rider=800lbs]
Thats a factor of ~4000!

Quite a bit of damage possible. Wow. Slow down kids....

I used to work on the freeways in Los Angeles and have seen many bizarre accidents but this one takes the cake. If someone relayed this story via word of mouth I would be skeptical as it just seems impossible. Looking at the pictures though, I have to agree with Alex, it is probably true.

You would think someone traveling at that rate of speed on a motorcycle would have been literally launched head over handlebars and ended up conceivably as far as hundreds of feet from the impact as opposed to inside the vehicle he struck but hey, stranger things have happened.

The vehicle looks like it was deffinately a rollover...but it's unlikely the motorcycle would have REMAINED in the vehicle during the rollover. That appears to have been added post-accident for affect.

Also, if the people had DIED in the car...there would be a certain...mess...know what I mean??

They might not have exploded or blown their guts all over the dash...but a fair amount of blood would be present. Also...if the M/C went INTO the vehicle, the rider would have come off the M/C right away...just like if a rider on a horse comes into contact with a tree branch. Hanging onto the reins won't keep you on the horse.

Most experienced riders know how to lay their bown down before an impact...in fact, most inexperienced riders would lay their bike down. I know it says he couldn't react...but he'd have at least let go of the handlebars.

Besides...how do they know what he could or couldn't do. Everyone involved died. No one can know what they were thinking...even witnesses can't be sure what they were *thinking*.

I am a member of a volunteer rescue squad. As part of the heavy and tactical rescue team for about 14 years, extricating both live and dead people from mangled vehicles, I can tell you that everything you see and read in Alex's post can definitely be true. First, the impact could easily jamb the motorcycle in place, even through overturning the vehicle. Second, if you look at the second photo, you can see that the driver's side windows (opposite the impact side) are crushed down, as would likely happen in a rollover onto the driver's side of the car. The photo of the driver's door shows that the hinges appear to have been sheared off, likely from the jaws of life, used to remove the door to access the driver and remove his body. Also, the "A" post on the the driver's side (the post between the windshield and the driver's door glass) has been cut through, likely with a sawzall, as part of the body extrication process. As for the absence of blood, I have two theories. One, I've seen many a horrific crash where people are severely injured or killed, and not a drop of blood is spilled. Two, to eliminate some of the gastlyness of the static display of the meshed vehicles, the company had it carefully cleaned by a pro. There is probably a lot more I can say about this display, but in the end, I definitely believe this occurred, and due to the stupidity of an inexperienced driver, three people are dead.

That stupid biker, can't he see that car is only a two seater.

The story is true. It made the rounds in Swedish media one or two years ago. The exhibit was at Stockholm International Fair, part of a yearly motorcylce fair with the English name "On Two Weels"

If I remember correctly, the accident occured in Scania (Skåne), the southernmost part of Sweden.

I once watched as a guy on a Honda 100 hit a car considerably bigger than this one at 50kmh (30mph). He impacted bang on the door pillar (probably a much stronger area than the door of this car) and the bike made it past the drive shaft cutting the floor in half as it went.

Of course a number of factors are involved but I can assure you, if the bike in the photo was doing anything like 250 kmh there would have been nothing to display but scrap metal.

The energy involved increases exponentialy as the speed rises. At 250 kmh that accident would have involved 25 times the energy of the accident I witnessed where the car was pretty much cut in half.

The accadent happened but this picture shown is a recreation of what happened.

I would give a PROBABLE on this one.

Here in Portugal we still had mandatory military service in the 90's and one of the unfit ones (I was also unfit because of a feet problem) had 3 platinium screws because of a situation very close to that one, he had cut the top of a car at over 200km/h when the car passed a red light.

He cut the roof (the equipment helmet/reinforced suit.. saved him) the motorcycle completely trashed the mini and killed everybody inside.

This is very likely true. A similar accident happened several years ago here in Jacksonville. A Harley driven by a young Navy guy doing 100+ on Monument Road t-boned a full size SUV and flipped it. A friend of mine came on the scene moments later and nearly ran over the motorcyclist who lay dying in the road. It was pandemonium with the accident and all the good samaritans running around. Needless to say, speed kills.

All I can say is that having been following a friend when a 4x4 coming the other way collided with the car in front of it, and spun tail end first right across in front of us...it's true.

We were (legally) doing 60mph and he spun the 4x4 through 360 degrees. His bike cartwheeled over the top and he was demolished as he hit the roof.

I escaped with my life, although I came off when I ran over what was left of him on the other side. There wasn't much left of his body, it was scattered far and wide, and mains pressure blood sure goes around 30 feet in all directions.

4x4 owner had faulty brakes and caused the accidents, but got off with a few points and a paltry fine.

Yes, I still ride a bike every day, no reason to give up what I enjoy.

If it's true, there should have been some things around; like, where is the right door of the car(it should be smashed in and clearly visible on the driver's sit); like, why the front suspensions of the bike aren't visible (they should have turned inside out and be visible behind the driver's sit); like, how they managed to pull out the person sitting next to the driver WITHOUT FIRST pulling out the motorcycle; like, why the motorcycle IS NOT broken in the middle of it as a result of pressure; last and most of all, how the bike managed to break into the door, but not over the door (the motorcycle was ON the road, it wasn't flying...) which should be the most obvious to happen.
Sure, I've seen a lot of accidents-and it could have happened something similar, but obviously due to physics restriction not something like that. Oh, and what did you say? The car FLIPPED? With a bike inside it? And the bike DID NOT got out and remained inside the car? And the back side of the motorcycle had no impact? Give me a break...

I believe it's probably a "modern-art" thing at some exhibition and nothing more.

No way did that Honda do ''155mph''. It's a VFR400R isnt it? An NC30?

Just having his discussion, glad someone from Sweden has commented on it.

Sorry Jimmy but the bike in question is a VFR750R RC45, capable of 160mph straight out of the box.

Race going fettled examples can easily acheive 190mph

Looking at that rear tyre size and the location of the exhaust, it looks like a 400 honda and probably an NC30 due to the single sided swinging arm. If it is not the VFR400 it will be the CBR400RR2 model.

The rollover is probable. The speed disclosed is definitely NOT, if it is indeed an NC30, as it definitely looks to be. The top road tested speed is 208kmh/130mph according to Performance Bikes magazine (ref: http://en.wikipedia.org/wiki/Honda_VFR400). I have a hard time believing a 1990 model year 400cc could do 155mph without serious modification!